<VV> Studly reply - Manifold issue
Sethracer at aol.com
Sethracer at aol.com
Thu Jun 9 11:20:23 EDT 2005
In a message dated 6/9/2005 7:11:37 AM Pacific Daylight Time,
kirbyasmith at gwi.net writes:
SS nuts are unlikely to gall if NeverSeize or equivalent is used on the
stud threads first. When the grease carrier evaporates due to heat, the
residual nickel and copper paste will keep the threads from galling.
Or, you can try monel nuts. They won't corrode and won't care about the
temperature. You likely won't find them at the local hardware store
though, unlike SS nuts.
kirby
The kits from the vendors have Stainless studs and Brass nuts. They seem to
work well.-Seth
More information about the VirtualVairs
mailing list