<VV> faulty grounds

[Joe West]

True... But the coupling pin provides a direct path because the pin extends
through the shift linkage directly at each end providing a direct path.


On 1/4/05 7:49 AM, "Harry Yarnell" <hyarnell1@earthlink.net> wrote:

> Shift linkage has a rubber 'isolation' in it; not sure if there's a
> conductive path here.
> 
> Harry Yarnell
> perryman garage and orphanage
> perryman, MD
> hyarnell1@earthlink.net
> 
> ----- Original Message -----
> From: "Joe West" <joew@diveaz.com>
> To: "Harry Yarnell" <hyarnell1@earthlink.net>
> Cc: "VV" <virtualvairs@corvair.org>
> Sent: Tuesday, January 04, 2005 9:46 AM
> Subject: Re: <VV> faulty grounds
> 
> 
>> Hmmmmm.... Let's see...
>> 
>> Shift Linkage
>> Temperature sending unit wire (resistive path)
>> Turbo head temperature sending unit (resistive path)
>> Pressure sending unit (resistive path)
>> 
>> These are the easy ones... I'll have to think about it some more to figure
>> out the rest.
>> 
>> 
>> On 1/4/05 7:17 AM, "Harry Yarnell" <hyarnell1@earthlink.net> wrote:
>> 
>>> Here's a mind teaser; what are the possible body ground paths on a
> corvair
>>> IF the body ground (from the battery) and the four corner engine to body
>>> straps are MISSING?
>>> E-brake and clutch cable are two. What else?
>>> 
>>> Harry Yarnell
>>> perryman garage and orphanage
>>> perryman, MD
>>> hyarnell1@earthlink.net
>>>  _______________________________________________
>>> This message was sent by the VirtualVairs mailing list, all copyrights
> are the
>>> property
>>> of the writer, please attribute properly. For help,
> mailto:vv-help@corvair.org
>>> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>>> Post messages to: VirtualVairs@corvair.org
>>> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>>>  _______________________________________________