<VV> Actual location of fuse holder 1965 factory A/C

[Jerry McKenzie]

Thanks Bill, I will verify it's location in the fuse block tomorrow.

jerry
> On October 1, 2019 at 7:57 PM William Hubbell wrote:
>
>
> Jerry,
>
> The chassis shop manual wiring diagram (figure 60) is wrong! The relay and fuse shown in that photo were deleted before production.
>
> The 1965 Assembly Manual has the correct wiring diagram:
>
>
>
> Bill Hubbell
>
> On Oct 1, 2019, at 4:20 PM, Jerry McKenzie via VirtualVairs wrote:
>
> I am looking to find the location of fuse holder of the AGC 15 fuse that is used for the 1965 Factory A/C system that is described as "in area of ignition switch" (not true) in the 65 chassis manual and the owners manual, and is shown on the A/C wiring diagram (fig 60) connected to the Relay Asm. but I have not yet located the relay...and it is not listed in the 1976 version of the chassis and body parts catalog....the 61-64 relay is listed 9.277 (GM 1365166)
>
> The location of the relay is not specified, and the colors of the wiring are not consistent between shop manual and owners manual. The 1966 and later A/C cars have a fuse in the main fuse block, but not the 1965. If you have dealt with this it would be appreciated if you would share the knowledge.
>
>
> Jerry McKenzie
>
> CFC, Corsa member
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________