<VV> Concentric wheel spacer necessary?

[FrankDuVal]

Curious, do these use the spin on knock-offs like the OEM wire wheels? 
Are the CCW knockoffs on the correct side?

Did the knock-off spinner come loose, or did the lug nuts back off?

I lost a wheel one day in two city blocks.  One of those lessons you 
will never forget, ALWAYS tighten the lug nuts. Yes. I didn't...........

$600 chrome wheel later..... ouch

Frank DuVal


On 11/29/2017 10:18 AM, Byron LaMotte via VirtualVairs wrote:
> I feel I should weigh in on this. my 1964 Spyder has 16" Dayton wire wheel
> conversion. Recently the left rear wheel left the car at 60 mph. A little
> too much drama! Fortunately I was able to drive onto some grass with
> minimal damage and recovered the wheel. Now I have little confidence and
> wish to go back to bolt on wheels but can't find 4 lug wheels to my liking
> and it seems difficult to change over to 5 lug. Found some 15" wheels that
> I like but they are 5 lug.
>
> On Wed, Nov 29, 2017 at 2:14 AM, Hugo Miller via VirtualVairs <
> virtualvairs at corvair.org> wrote:
>
>