<VV> Converting 4 lug to 5?

[Hugo Miller]

### Might be an idea to check that the internal diameter of the adaptor will 
go over the boss on the hub. My 5 stud adaptors do, but the 'universal' 4 
stud ones didn't quite, till I got my angle grinder out ;)



-----Original Message----- 
From: Matt Nall via VirtualVairs
Sent: Wednesday, November 29, 2017 7:35 PM
To: virtualvairs at corvair.org
Subject: Re:  Converting 4 lug to 5?




-----Original Message-----
From: Byron LaMotte

I can't find 4 lug wheels to my liking and it seems difficult to change over 
to 5 lug. Found some 15" wheels that I like but they are 5 lug.
=====================================================


Any local Machine shop, or you can do at home if you have a big drill press, 
can  weld up the one hole [ required for Chevy 5x4.75" ] and  and redrill 
and install studs.  If you choose to go with  5x4.5" [  Ford / Chrysler ] 
then no welding is required   and one original hole is used...


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio

http://tinyurl.com/Matts-Tech-Pages








_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


---
This email has been checked for viruses by AVG.
http://www.avg.com