<VV> what, exactly, does this mean?

[BobHelt at aol.com]

Dan,
What I'm suggesting is that maybe there was a #2/3 type main  bearing in 
the #4 position. And maybe a std size that should have been  undersize.
Bob Helt
 
 
In a message dated 9/12/2016 6:42:04 A.M. US Mountain Standard Time,  
DTerry8123 at aol.com writes:

As I remember, that is what he said. He was able to find a std. NOS  
bearing from one of our chapter members.
 
Dan Terry
 
 
In a message dated 9/11/2016 11:49:58 P.M. Eastern Daylight Time,  
virtualvairs at corvair.org writes:

Maybe  he found a bearing that did not have the 1.5 thou  offset. 
Bob  Helt


In a message dated 9/11/2016 5:03:34 P.M. US Mountain  Standard Time,  
virtualvairs at corvair.org writes:

His  take  was that the main  bearing closest 
to the crank gear,  had too much   clearance