<VV> [SCG] Corvair Condenser Removal Decal - Help, Please

[Dusty Steinberg]

There is a company in Tampa Florida that will rebuild your original compressor for approximately $300.  They also will rebuild your original receiver drier, and recondition the expansion valve after testing it.  I have had them do work for me on both my 1962 Corvair, 1962 Chevy Bel Air, and my 1969 Cadillac.  Depending on the time of the year, they usually can turn it around in 4 - 6 weeks.  Here is their website.

www.classicautoair.com/

Paul in CT

-----Original Message-----
>From: air_cooled63--- via VirtualVairs <virtualvairs at corvair.org>
>Sent: Jul 4, 2015 9:42 PM
>To: Bill Hubbell <whubbell at verizon.net>
>Cc: Virtual Vairs <virtualvairs at corvair.org>, Bill Hubbell via SCG-list <scg-list at corvair.org>
>Subject: Re: <VV> [SCG] Corvair Condenser Removal Decal - Help, Please
>
>Hi Bill, FYI, My A6 compressor was working good, but was leaking freon at the pulley seal. Couldn't find any body to replace it, so I bought the tool kit and did it myself. Learned a lot about the system. It's still working good.  Also found out Car Quest auto parts can get rebuilt A6 compressors for less than $80.  But then again you would want the original compressor left on. I replaced a Corvair compressor for a friend in Charleston a year ago. 
>Jerry Brown
>
>Sent from my Verizon Wireless 4G LTE DROID
>
>Bill Hubbell <whubbell at verizon.net> wrote:
>
>>No, he never has.  Perhaps if somebody provides him with a good copy he would. 
>>
>>Bill
>>
>>On Jul 2, 2015, at 9:07 PM, air_cooled63--- via SCG-list <scg-list at corvair.org> wrote:
>>
>>At one time Cal Clark was wanting a copy of a good decal to reproduce it. Don't know of he ever did.
>>Jrrru
>>
>>Sent from my Verizon Wireless 4G LTE DROID
>>
>>air_cooled63--- via SCG-list <scg-list at corvair.org> wrote:
>>
>>> My 65 four door with a/c had the decal in the same place as shown.  The cover was so rotten I tossed it away but kept the metal parts.
>>> Jerry Brown.
>>> 
>>> Sent from my Verizon Wireless 4G LTE DROID
>>> 
>>> Bill Hubbell via SCG-list <scg-list at corvair.org> wrote:
>>> 
>>>> I decided to take a detailed look at my photos from past conventions, car
>>>> shows, etc, and I discovered THIS excellent example from the 2007 CORSA
>>>> convention in Detroit.
>>>> 
>>>> I don't know anything about the car, however, as I did not take any other
>>>> photos of it.  The decal appears correct and completely intact, but it is
>>>> installed in the wrong location, leading me to wonder if it is original,
>>>> NOS, or a reproduction.
>>>> 
>>>> I'd appreciate any information anybody could provide about this car as I
>>>> would like to contact the owner.
>>>> 
>>>> Thanks
>>>> 
>>>> Bill Hubbell
>>>> President, SCG
>>>> 
>>>> -----Original Message-----
>>>> From: SCG-list [mailto:scg-list-bounces at corvair.org] On Behalf Of Bill
>>>> Hubbell via SCG-list
>>>> Sent: Thursday, July 02, 2015 1:13 PM
>>>> To: Virtual Vairs; Stock Corvair Group
>>>> Subject: [SCG] Corvair Condenser Removal Decal - Help, Please
>>>> 
>>>> I am attempting to secure quality photos of original 61-65 Corvair AC
>>>> Condenser Removal decals.
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________