<VV> The great puzzle

[Eric Lucas]

My thought is pressure build-up in the crankcase forcing oil where it should not be.
 
Eric in Indiana
 
> Date: Sun, 30 Nov 2014 19:58:38 -0700
> To: virtualvairs at corvair.org
> Subject: Re: <VV> The great puzzle
> From: virtualvairs at corvair.org
> 
> Please put your thinking caps on for this one. I have just had a 110 engine rebuilt ( twice). It burns oil on one side. I know because I set up a dual muffler   It burns oil at high vacume. ( not at full speed). Only at idle. So much so that after you park and let the engine sit for a few minutes there is a pool of oil in the driver side cylinders. Ps. There is a pool of oil under the carb on the driver side.   The Pistons are new from Clarks.  The cylinders are new.  And match on size. We checked that.  The heads have been re done ( twice). What are we missing?  Ps again The crossover tube was disconnected along time ago.  Let's see we specked the Pistons for micro cracks. And ran the engine with a 1/2 cut valve cover to make sure there wasn't flooding I. The driver side.   What have I missed. Any good ideas would be great. Thanks
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________