<VV> Diff wanted

[jvhroberts at aol.com]

 Negative. They're the same. But, the yokes on the earlies slide, making the measurement moot. The side adjusters, etc., are all the same. In fact (but why would you want to?) you can use an early diff in a late case and vice versa, as long as you put the yoke nuts in for the lates. 

 

John Roberts
 

 

-----Original Message-----
From: Frank DuVal via VirtualVairs <virtualvairs at corvair.org>
Cc: VirtualVairs <VirtualVairs at corvair.org>
Sent: Sat, May 31, 2014 1:56 pm
Subject: Re: <VV> Diff wanted


Isn't the late model differential wider, yoke to yoke, than the early model?

You might need to shorten the axle shafts to use it. 

Frank DuVal

On May 31, 2014, at 9:43 AM, Mark Corbin via VirtualVairs <virtualvairs at corvair.org> 
wrote:

> Wanted: Diff (bare case or complete) for a ‘65 ‘Brier w/automatic. Must be the 
‘65 car style with the lower control arm attachment bolt pads, not the EM style 
which doesn’t have them.
> 
> -Mark Corbin
> 5474 S.R. 19
> Galion, Ohio 44833
> 419-468-4942
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________