<VV> Flow thru rockers

[Jay Maechtlen]

On 7/30/2014 11:12 AM, Frank DuVal via VirtualVairs wrote:
> Yes, Clark, I do the screen trick to most of my cars. Black Nylon 
> works the best.
>
> Frank DuVal
>
cool - seems like one or both of those  tricks should be found in one or 
more books by now?

>
> On 7/30/2014 1:59 PM, Clark Hartzel via VirtualVairs wrote:
>> Bill Hubbell is correct.  They all rust out from junk clogging up the 
>> tiny
>> vents.  What I did on some of my late models is to hole saw a 1.5" 
>> hole in
>> the bottom of the rocker panel under the front fender to duplicate the
>> 1960-64 cars with their stamped holes.  At least you can fish a bent 
>> coat
>> hanger in that hole and pull out the leaves and seeds that fall into the
>> windshield vent area.  A better idea yet would be to remove the vent 
>> panel
>> in front of the windshield and glue some window screen on the bottom 
>> side to
>> keep the junk out in the first place!
>> Clark Hartzel
>

-- 
Jay Maechtlen SoCal '61 2-dr modified w/fiberglass skin, transverse 3.8 
Buick V6 TH440T4 trans

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com