<VV> Starting engine been idle 6 years

[Sethracer at aol.com]

In a message dated 9/7/2013 3:51:20 P.M. Pacific Daylight Time,  
joel at joelsplace.com writes:

180 out  seems most likely but only if you've had the distributor out since 
it last  ran.  Pull the plug out of #1 and make sure it just finished the  
compression stroke when the rotor lines up with the #1 post in the  
distributor.


Which you do by sticking your finger over the hole -until compression  
blows it off. Then stop and look at the rotor!  -Seth