<VV> EM accelerator pedal

[corvairduval at cox.net]

To hold carbs open, use the return spring but attach the free end to the
fuel lines, alternator (NOT the HOT terminal!), whatever, near the rear of
the engine.

For really guessing, install the pedal slightly foward of vertical.

Frank DuVal

Original Message:
-----------------
From: Marc Sheridan sheridanma1966 at gmail.com
Date: Tue, 12 Feb 2013 09:43:36 -0500
To: virtualvairs at corvair.org
Subject: <VV>  EM accelerator pedal


What I did with my '66 was to manually open the carbs wide open and
then install the pedal on the floor. You can give it a little extra,
to make sure you get full throttle, You can then check it by having
someone push the pedal to the floor, and looking to see if the carbs
are all the way open.

Marc Sheridan.

On Tue, Feb 12, 2013 at 9:28 AM, Kinzelman, Andy
<akinzelm at greatnortherncorp.com> wrote:
> Guys,
> It appears the gas pedal has slipped on the shaft of my 64.  Due to
medical issues I am currently unable to access my manuals.
> Can anybody supply the angle or dimension to realign the gas pedal to the
shaft?

--------------------------------------------------------------------
mail2web LIVE – Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE