<VV> Ignition

[Jason Cesana]

The 60's key has no letter. This new one does have an L stamped on the backside. Could be as Lonzo said. May have to buy another key and sell this one. 

Jason Cesana
Sent from my iPhone

On Apr 7, 2013, at 10:12 PM, "J R Read" <hmlinc at sbcglobal.net> wrote:

> I defer to Lonzo's answer.
> 
> But if it is the key that I think it is (the picture did not come through), I do not recall any letter stamped on it - like on a normal key would have. It seems like more of a keepsake type of thing and you often see them on eBay - usually still in the package (uncut).
> 
> Later, JR
> 
> 
> ----- Original Message ----- From: "Lon Anderson" <lonzovair at aol.com>
> To: <hmlinc at sbcglobal.net>; <jacesana1 at verizon.net>; <virtualvairs at corvair.org>
> Sent: Sunday, April 07, 2013 8:44 PM
> Subject: Re: <VV> Ignition
> 
> 
>> 
>> As for keys, 60-66 ignition are all the same.... then the "letter" keys started in '67 and are different each year (on a rotating 4 year schedule) after that...
>> See if there is a letter stamped into the neck, like "A" or "D"....
>> Later,
>> Lonzo
>> 
>> 
>> -----Original Message-----
>> From: J R Read <hmlinc at sbcglobal.net>
>> To: Jason Cesana <jacesana1 at verizon.net>; virtualvairs <virtualvairs at corvair.org>
>> Sent: Sun, Apr 7, 2013 9:23 pm
>> Subject: Re: <VV> Ignition
>> 
>> 
>> Well, either I've not seen them all or your switch has enough ware that the
>> LM one works.  OR - both of these are possible?
>> Later, JR
>> 
>> 
>> ----- Original Message ----- From: "Jason Cesana" <jacesana1 at verizon.net>
>> To: "'J R Read'" <hmlinc at sbcglobal.net>; <virtualvairs at corvair.org>
>> Sent: Sunday, April 07, 2013 8:19 PM
>> Subject: RE: <VV> Ignition
>> 
>> 
>>> Interesting. Perhaps my 60 had a late model ignition in it as I had one
>>> for
>>> that car. Thanks JR.
>>> Jason
>>> 
>>> -----Original Message-----
>>> From: J R Read [mailto:hmlinc at sbcglobal.net]
>>> Sent: Sunday, April 07, 2013 9:16 PM
>>> To: Jason Cesana; virtualvairs at corvair.org
>>> Subject: Re: <VV> Ignition
>>> 
>>> The one's I've seen as you describe only fit the LM ignition switch.
>>> Later, JR
>>> 
>>> 
>>> ----- Original Message ----- From: "Jason Cesana" <jacesana1 at verizon.net>
>>> To: <virtualvairs at corvair.org>
>>> Sent: Sunday, April 07, 2013 8:03 PM
>>> Subject: <VV> Ignition
>>> 
>>> 
>>>> 
>>>> 
>>>> Hey folks. I recently picked up an uncut key with the word CORVAIR
>>>> inscribed
>>>> on it. I was going to have it cut to match my latest Corvair a 64 Monza.
>>>> I
>>>> checked the key before having it cut and it does not slide into the
>>>> ignition. I checked the key to the one that works and they seem to match.
>>>> Is
>>>> the late models ignition similar but not exact to the earlies? This might
>>>> help explain this. Thanks
>>>> 
>>>> 
>>>> 
>>>> Jason Cesana
>> 
>> 
>> 
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights are the property
>> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America, http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>