<VV> Ignition

[J R Read]

I defer to Lonzo's answer.

But if it is the key that I think it is (the picture did not come through), 
I do not recall any letter stamped on it - like on a normal key would have. 
It seems like more of a keepsake type of thing and you often see them on 
eBay - usually still in the package (uncut).

Later, JR


----- Original Message ----- 
From: "Lon Anderson" <lonzovair at aol.com>
To: <hmlinc at sbcglobal.net>; <jacesana1 at verizon.net>; 
<virtualvairs at corvair.org>
Sent: Sunday, April 07, 2013 8:44 PM
Subject: Re: <VV> Ignition


>
> As for keys, 60-66 ignition are all the same.... then the "letter" keys 
> started in '67 and are different each year (on a rotating 4 year schedule) 
> after that...
> See if there is a letter stamped into the neck, like "A" or "D"....
> Later,
> Lonzo
>
>
> -----Original Message-----
> From: J R Read <hmlinc at sbcglobal.net>
> To: Jason Cesana <jacesana1 at verizon.net>; virtualvairs 
> <virtualvairs at corvair.org>
> Sent: Sun, Apr 7, 2013 9:23 pm
> Subject: Re: <VV> Ignition
>
>
> Well, either I've not seen them all or your switch has enough ware that 
> the
> LM one works.  OR - both of these are possible?
> Later, JR
>
>
> ----- Original Message ----- 
> From: "Jason Cesana" <jacesana1 at verizon.net>
> To: "'J R Read'" <hmlinc at sbcglobal.net>; <virtualvairs at corvair.org>
> Sent: Sunday, April 07, 2013 8:19 PM
> Subject: RE: <VV> Ignition
>
>
>> Interesting. Perhaps my 60 had a late model ignition in it as I had one
>> for
>> that car. Thanks JR.
>> Jason
>>
>> -----Original Message-----
>> From: J R Read [mailto:hmlinc at sbcglobal.net]
>> Sent: Sunday, April 07, 2013 9:16 PM
>> To: Jason Cesana; virtualvairs at corvair.org
>> Subject: Re: <VV> Ignition
>>
>> The one's I've seen as you describe only fit the LM ignition switch.
>> Later, JR
>>
>>
>> ----- Original Message ----- 
>> From: "Jason Cesana" <jacesana1 at verizon.net>
>> To: <virtualvairs at corvair.org>
>> Sent: Sunday, April 07, 2013 8:03 PM
>> Subject: <VV> Ignition
>>
>>
>>>
>>>
>>> Hey folks. I recently picked up an uncut key with the word CORVAIR
>>> inscribed
>>> on it. I was going to have it cut to match my latest Corvair a 64 Monza.
>>> I
>>> checked the key before having it cut and it does not slide into the
>>> ignition. I checked the key to the one that works and they seem to 
>>> match.
>>> Is
>>> the late models ignition similar but not exact to the earlies? This 
>>> might
>>> help explain this. Thanks
>>>
>>>
>>>
>>> Jason Cesana
>>>
>>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________