<VV> Fw: Exhaust port tube fit to manifold

[Frank DuVal]

I would not worry about a slight loose fit to the manifold. The new 
seals will prevent leaks there. I tap (beat) the manifolds in place with 
a hammer while tightening the nuts.

Frank DuVal


On 9/17/2012 9:28 PM, Doug Mackintosh wrote:
> Andy Kinzelman pointed out that I did not ask the question I meant to ask in my original post. My Title was correct, but I bungled my question.
> The issue I am dealing with is a loose fit between the exhaust port tube and the MANIFOLD,  not the head.
>   
> Sorry for the confusion, and if you answered the question I asked, please feel free to answer the question I MEANT to ask now.
>   
>