<VV> 1964 Cylinder fit a 1962?

[Daniel Monasterio]

Right !!

Daniel

> Date: Sun, 15 May 2011 23:50:31 +0100
> From: dougmackintosh at yahoo.com
> To: virtualvairs at corvair.org
> Subject: <VV> 1964 Cylinder fit a 1962?
> 
> I think the 1964 cylinders are the same as the 1962, except for the clearance 
> notches for the longer crank throw. I believe the length from the base gasket 
> surface to the head gasket surface is the same. I think the stroke difference is 
> handled by a different distance from piston top to wrist pin. In that case, I 
> could use a 1964 cylinder barrel to replace one barrel in a 1962. 
> 
> 
> Am I correct?
> 
> Thanks
>  -- Doug Mackintosh
> Corsa member since 1996
> Corsa/NC member since 1996, Virtual Vairs member
> Corvair owner 1969-1971 and 1996-on 
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________