<VV> 25,000 mile oil change

[Mark Durham]

My bypass filter traps those acids, moisture, etc, as well. The 1
micron is the particle size it takes down to. The oil stays clean
looking all the time until the bypass has absorbed all it can, then
you change the filter and the oil clears up again. Mark Durham

On Fri, Mar 18, 2011 at 8:35 PM, Dennis Pleau <dpleau at wavecable.com> wrote:
> Alcohol, water and most acids will go through a 1 micron filter.  All
> contaminants you want to drain out on a regular basis.
>
> dp
>
> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Mark Durham
> Sent: Friday, March 18, 2011 8:06 PM
> To: Chris & Bill Strickland
> Cc: virtualvairs at corvair.org
> Subject: Re: <VV> 25,000 mile oil change
>
> Ah, that is why you install the bypass filter, that keeps all those
> extra contaminants out of the oil by trapping them in the filter, down
> to 1 micron or less. Mark Durham.
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>