<VV> Rear seat belts in EM 4 door
Bob Hill
vintagevwbeetles at gmail.com
Tue Feb 1 10:14:16 EST 2011
Tom,
Thanks. I think my concern is that the pans are original and while they
appear to be pretty strong I am not sure - afterall it is 37 year old metal
: )
On Tue, Feb 1, 2011 at 9:02 AM, Tom Hughes <corvairdad at gmail.com> wrote:
> Bob,
>
> On the EMs I've had and have, I use large body washers (3" in diamter) on
> the backside. As long as the sheetmetal is solid, you'll be fine. BTW,
> there
> are dimples in the sheetmetal to guide you where to put the holes. Also,
> see
> this link for a drawing.<
> http://autoxer.skiblack.com/nallm/62-4seatbelts.pdf>
>
>
> On Tue, Feb 1, 2011 at 9:36 AM, Bob Hill <vintagevwbeetles at gmail.com>
> wrote:
>
> > I am looking at a EM 4 door that I want to use as a Saturday afternoon
> > cruiser with the family so I would need to install rear seatbelts (the
> car
> > has front ones already installed). I am fairly certain that the EMs had
> no
> > re-enforcement points for the belts so how is the best way to mount them.
> > My first though is to mount them directly to the floor pans and use
> larger
> > washers to help "distribute the load" but not that is adequate.
> >
> > Suggestions?
> >
> > Thanks
> >
> > Bob
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights
> are
> > the property
> > of the writer, please attribute properly. For help, mailto:
> > vv-help at corvair.org
> > This list sponsored by the Corvair Society of America,
> > http://www.corvair.org/
> > Post messages to: VirtualVairs at corvair.org
> > Change your options:
> > http://www.vv.corvair.org/mailman/options/virtualvairs
> > _______________________________________________
> >
>
>
>
> --
> Tom in Baltimore
> corvairfleet.blogspot.com
>
>
>
> --
> Tom in Baltimore
> corvairfleet.blogspot.com
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
--
(o\_!_/o) Vintage VW Beetles
More information about the VirtualVairs
mailing list