<VV> Rear seat belts in EM 4 door

[Tom Hughes]

Bob,

On the EMs I've had and have, I use large body washers (3" in diamter) on
the backside. As long as the sheetmetal is solid, you'll be fine. BTW, there
are dimples in the sheetmetal to guide you where to put the holes. Also, see
this link for a drawing.<http://autoxer.skiblack.com/nallm/62-4seatbelts.pdf>


On Tue, Feb 1, 2011 at 9:36 AM, Bob Hill <vintagevwbeetles at gmail.com> wrote:

> I am looking at a EM 4 door that I want to use as a Saturday afternoon
> cruiser with the family so I would need to install rear seatbelts (the car
> has front ones already installed).  I am fairly certain that the EMs had no
> re-enforcement points for the belts so how is the best way to mount them.
> My first though is to mount them directly to the floor pans and use larger
> washers to help "distribute the load"  but not that is adequate.
>
> Suggestions?
>
> Thanks
>
> Bob
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>



-- 
Tom in Baltimore
corvairfleet.blogspot.com



-- 
Tom in Baltimore
corvairfleet.blogspot.com