<VV> Used crank gear

[Craig Nicol]

Joel asked:
Are there any issues with have a machine shop pull a good used crankgear off
one crank, and press it onto another?

Craig replies:
It takes a giant press, 50T or so. Don't forget the gasket that's between
the gear and the crank.  Without the gasket, oil from the crankcase area
will pass through the keyway on to the clutch. DAMHIK :-)   Other than that,
it's not a bad job.

Craig Nicol
66 Monza 140 EFI
66 Monza 4.2L V8
61 Rampside