<VV> Corvair Engine #3 Journal Nicked

[Mark Durham]

No, it means "file it" in accordance with my instructions, gently drag
a fine flat file until bump is gone, if you made slight marks, polish
them out with something finer than 1000 grit, I use 1500, until gone,
then move on. Put it back together. Mark Durham

On Wed, Nov 17, 2010 at 9:54 PM, Charles Lee <Chaz at properproper.com> wrote:
> Does that mean "don't bother filing/sanding/smoothing/etc. it down" ?
>
> As Spence said (later) I can ignore it if it is not raised above the surface
>
> It is raised, so I need to shave it off, or it will tear into a new bearing
> ?
>
> PS: Isn't the rod 'bearing' actually a 'bushing' ?
>
> Charlie
>
>
>
>