<VV> mic-ing my rod bearings (1967 Monza 110 PG)

[Mark Durham]

Charlie, Rod journals should be 1.799 to 1.800 if std, smaller if
turned .010, .020 or .030: so the 1 inch to 2 inch mike should work
there. Mains are in the 2.0978 to 2.0988 range for std, depending,
they are not the same, look in a manual. So the 2"-3" mike should work
there.

I just took my engines heads and piston/cylinder assy's off to find a
oil use pbm, 5 out of 6 cyls very worn, found a severely worn cam
lobe, time to split the case.
Mark Durham

On Tue, Nov 2, 2010 at 10:46 AM, Charles Lee <Chaz at properproper.com> wrote:
> I'm mic-ing my rod bearings :
>> I have three micrometers,  one .25" to 1", a 1" - 2" and a 2" to 3"
>> It seems that these journals (?) on the crankshaft are too big for the 1" -
> 2" one and the 2" to 3" is too small ?
>