<VV> Wanted cylinder heads

[levair at aol.com]

I have a set of 110 with new buried valve seats and bronze guides,
E mail me privately.

Warren

-----Original Message-----
From: Frank DuVal <corvairduval at cox.net>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Sun, Mar 21, 2010 1:10 am
Subject: Re: <VV> Wanted cylinder heads

15 years ago I would have agreed with this. My experience since then is
the small seats fall out also. I personally have changed more small
valve heads because of seat fall out than 140 heads.

If you want it bullet proof, you have to spend the money to get new
seats installed by a Corvair head specialist.

But if you can find a set of never run hot small valve heads-go for it.
It is still a small percentage of Corvairs that have had the valve 
seats
fall out.

Frank DuVal

chartzel at comcast.net wrote:

>Looking for a pair of 1965-69 95 or 110HP heads.  I want to save the 
140HP engine in my tour car and replace it with a small valve engine 
for less chance of valve seat fallout on the highway.  I have an engine 
in the garage just waiting for heads.
>
>Thanks, Clark Hartzel
>
>
>
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights 
are the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: 
http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________