<VV> wd-40 cap uses

[kevin nash]

> And I'll bet someone has even turned these out in aluminum complete with 
> an o-ring groove, all the while throwing the best manifold intake plug 
> into the trash -- yes, those nice little round red tops to your WD-40 
> cans (or any other can that uses them) -- they fit perfectly, red for 
> visibility, paid for and ready to use, as is.
> 
> Don't know who originally recognized this fact, but it wasn't me ... 
> 
> Bill Strickland

 

  Bill- another use for the wd-40 caps is to help center the gaskets and cross over manifold

on turbo's, as the od on the protruding part of the cap fits the id's of the manifold. The

cross- over manifold can cause some flow problems just by careless installation, as the bolt

holes are very loose and will not register the tube holes over the intake holes.

Kevin


> A non-text attachment was scrubbed...
> Name: DSC01724.JPG
> Type: image/jpeg
> Size: 155342 bytes
> Desc: not available
> Url : http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20100620/4a363639/attachment.jpe 
> 
> 
> ------------------------------
> 
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mail to: vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> VirtualVairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> 
> End of VirtualVairs Digest, Vol 65, Issue 92
> ********************************************

 		 	   		  
_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1