<VV> Summer/winter plate

[Ron]

Rather than bend that tab up and down until it breaks off, I make an 
aluminum insert that is easily inserted and removed as the season requires.
RonH

----- Original Message ----- 
From: "Clark Hartzel" <chartzel at comcast.net>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Tuesday, July 27, 2010 6:50 AM
Subject: <VV> Summer/winter plate


> This plate is only on late model Corvairs.  The earlies just had a piece 
> of
> the shroud tin bent upwards toward the oil cooler.  I could never 
> understand
> why you would want to direct hot air onto the oil cooler so I bent all of
> mine shut.
> If you drive in the winter you want some heat coming up to the carbs so 
> bend
> it open again.
> Clark
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________