<VV> coil wiring help needed

[Bryan Blackwell]

Hi Ray,

You're correct that the yellow wire goes on the coil - it's only hot when cranking.  The other wire would also go on the coil, that's the "run" circuit.  I'm not sure, but I thought only Spyders had the separate resistor - measure the voltage and see if it's around 8 volts when "on", if so then the resistor is in the harness.

--Bryan

On Aug 2, 2010, at 3:02 AM, Ray Grymm Rodriguez wrote:

> Based on my memory this could make sense as this could be the line that supplies a straight 12v shot to the coil when cranking for hotter spark... and that would mean both the dark blue (or black) and yellow wires go to the coil..... but.....  then what wire connects to the single plug coming up from near the harmonic balancer (oil pressure?)?  If both these wires go the coil there appear to be no wires left to connect to that plug.