<VV> Help!!! Fuse Problems

[J R Read_HML]

Well, it is really only ONE wire and the switch interrupts it - except when 
in R.  Then, the switch is closed and the circuit is completed.  Just like 
other bulbs in the car, the ground is through the car body.
Later, JR

----- Original Message ----- 
From: "Chris & Bill Strickland" <lechevrier at earthlink.net>
To: <virtualvairs at corvair.org>
Sent: Saturday, July 18, 2009 7:43 PM
Subject: Re: <VV> Help!!! Fuse Problems


> virtualvairs-request at corvair.org wrote:
>
>>I unplugged the two wires from the 4 speed bu switch and have no problems 
>>blowing fuses
>>
>
> VV-Help might moderate your situation, but they won't fix your short -- 
> try unplugging the two wires one at a time and testing -- should tell
> you if it is the switch or the wiring to the lamps or the lamps
> themselves -- a bulb could even be installed in the wrong alignment.
> IE, at this point, if it's not the switch, it's the rest of it.
>
> Bill Strickland
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________