<VV> Crankshaft pilot bearing diameter
Jim Houston
jhouston001 at cfl.rr.com
Tue Dec 22 18:16:08 EST 2009
My crank was .902, the bushing was .903 -- I knurled it using a method
someone sent me and increased the OD to .905.. Tapped it into the crank
with some Loctite - I'm confident it will be fine...
Thanks to all that replied...
Jim Houston
Clark Hartzel wrote:
> The crankshaft I.D. is .902/.903 and the bushing I.D. after pressing in
> place is .5905/.5920. Unfortunately I do not have the bushing drawing
> so I can't tell you what the O.D. is supposed to be. I could guess at
> .903/.905 but it is just a SWAG.
> Clark Hartzel, CPF Curator
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.430 / Virus Database: 270.14.117/2581 - Release Date: 12/22/09 08:09:00
>
>
More information about the VirtualVairs
mailing list