<VV> Muffler hangers

[Shaun McGarvey]

OR, don't forget you can double-nut the stud and remove it ...

yea, Vairily ... Shaun

----- Original Message ----- 
From: "Harry Yarnell" <hyarnell1 at earthlink.net>
To: "Virtual Vairs" <virtualvairs at corvair.org>; "Stephen Upham" 
<contactsmu at sbcglobal.net>
Sent: Thursday, January 03, 2008 6:52 AM
Subject: Re: <VV> Muffler hangers


> Been awhile since I've done this, but I believe the top fasten point is a
> stud, and yes the muffler bracket fits between the shroud and the head.
> Easiest way is to notch the upper hole in the bracket to form a slot 
> instead
> of a hole, and it will slip over the stud in the head.
>
> harry yarnell
> perryman garage and orphanage
> hyarnell1 at earthlink.net
> ----- Original Message ----- 
> From: "Stephen Upham" <contactsmu at sbcglobal.net>
> To: "Virtual Vairs" <virtualvairs at corvair.org>
> Sent: Thursday, January 03, 2008 12:08 AM
> Subject: <VV> Muffler hangers
>
>
>>I was just looking at how to install the factory muffler hanger
>> brackets.  Apparently, if I am identifying the correct bolts on the
>> head in the factory service manual diagram, I will have to remove the
>> entire top engine shroud in order to get the hanger on the top bolts
>> on either side.  It looks like the hanger fits between the shroud and
>> the engine head.  Since it fits behind and under the shroud, the
>> shroud would have to come off first.
>>
>> Anyone with experience in doing this would be greatly appreciated.
>>
>>
>> Stephen U
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
>> the property
>> of the writer, please attribute properly. For help,
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________