<VV> BRAND

[Dennis PLEAU]

I used a wire wheel in my electric drill motor when I did the 63 Garrie Fox now owns.  it did a good job and was within the rated RPM for the brush.
 
Dennis



> From: N2VZD at aol.com> Date: Fri, 15 Feb 2008 23:41:38 -0500> To: virtualvairs at corvair.org> Subject: Re: <VV> BRAND> > the brank i used was crc sold at napa. bought 1 case to do the car and it > worked out well for me.> yes wires come out of those wheels , but never got me injured yet. been > doing it for many years with no injuries. in fact been doing it most of today > on engines and a differential.> the wheels last quite a while and do a neat job. you must check carefully > for wire pieces in any parts..i use air and a magnet. i would say the wire > failure is not much more than the wire wheels on a bench grinder...> regards, tim colson
_________________________________________________________________
Helping your favorite cause is as easy as instant messaging. You IM, we give.
http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join