<VV> paint stripping

[Dennis PLEAU]

I've never seen a wire wheel rated anywhere the RPMs my die grinder turns.  When one of those wires comes of at 20K rpms, it could do some damage.
 
Dennis



> From: N2VZD at aol.com> Date: Fri, 15 Feb 2008 21:10:39 -0500> To: virtualvairs at corvair.org> Subject: Re: <VV> paint stripping> > today, i would consider just getting a cheapy palm sander (harbor freight > @$8) and lots of sandpaper , the wet / dry grey stuff in 120 or so grit and > have at it until the sander is too hot to hold on to. i also used a high speed > die grinder with wire wheels to get at the hard to reach areas,> i have sandblasted , and stripped cars over the years. i found that certain > spray can gasket removers work as well as or better than the aviation paint > strippers. one case of spray cans cost about the same as a gallon of stripper > and more than did a good job on a 62 vette i did years ago.> regards, tim colson
_________________________________________________________________
Climb to the top of the charts! Play the word scramble challenge with star power.
http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan