<VV> Relay for heater blower motor

[shortle]

I used a blower motor/relay/wiring harness from a mid 80's "big car" (a Buick Electra if my memory is correct).It was a pretty straight forward install,I think.

-----Original Message-----
>From: Chris & Bill Strickland <lechevrier at earthlink.net>
>Sent: Apr 24, 2008 12:46 AM
>To: virtualvairs at corvair.org
>Subject: Re: <VV> Relay for heater blower motor
>
>The RS online catalog is not very helpful on this one, at lest on the 40 
>amp SPST above it, there is a schematic --
>http://www.radioshack.com/sm-relays-and-transformers--fi-2032277_cp-2032058.2032230.html
>
>How many terminals do you have on the relay you have?
>
>And with the relay wired in, do you turn the fan switch on to turn the 
>fan on?  Or does it come on with the ignition switch?
>
>Yes, the end result 'should' turn off with the ignition switch.  This 
>could just be the way this realy works, or it could be that it is wired 
>okay, but the relay is bad in the box.
>
>Bioll Strickland
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________