<VV> Light switch removal tool - wanted

[Jim McLott]

Seth,
 
Now that I'm home and can see my copy of the Clark's catalog, I don't think the Eastwood part I quoted you is what you need.  The Eastwood part will tighten the headlight switch bezel (CU2529) and it looks like you need something to tighten what they call the headlight switch nut (CU3622).  It's been a few years since I removed the dash for repainting so I'm not exactly sure how I R&R'ed that nut.  Probably with long, fine-pointed needle-nose pliers, with the points jammed into the holes in the nut.  At least that's how I'd do it today....
 
Jim McLott & Christine, the 1966 Monza convertible wonder-car
Member: CORSA, Corvair Atlanta, Heart of GA Corvairs and Group Red (ret.)
http://www.wittelaw.com/personal/groupred/mclott.htm
 

________________________________

From: Sethracer at aol.com [mailto:Sethracer at aol.com]
Sent: Wed 7/18/2007 4:48 PM
To: Jim McLott
Subject: Re: <VV> Light switch removal tool - wanted


In a message dated 7/18/2007 1:32:32 P.M. Pacific Daylight Time, Jim.McLott at DOR.GA.GOV writes:

	Eastwood sells one for $24.99, part number 52063 in the catalog I have
	here at work.
	
	I've also had good luck using a pair of crossed screwdrivers.
	
	Jim McLott

 
Thanks, Jim - I will check it out! - Seth



________________________________

Get a sneak peek of the all-new AOL.com <http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982> .