<VV> re: yoke bolts

[tom zimmermann]

Barry,the 'correct' bolts have a taller head to get a wrench on,no problem...the un-threaded portion is also necked down from .310" dia near the head,to .285" for clearance in the yoke before the threads start : a 'common' bolt may bind up,causing the strap to be loose or (you) to break the bolt off in the yoke...bolts from any RWD GM are useable,if you don't have the Corvair ones,but are 5/64ths longer,not an issue if you chase out the threads in the yoke first ; these don't use lock washers,btw...Tom Z..//

 
---------------------------------
Sucker-punch spam with award-winning protection.
 Try the free Yahoo! Mail Beta.