<VV> Strange (?) double failure

[Frank DuVal]

Agreeded, this is one area that the fastener, castle nut, should NEVER 
be baced up to fit a cotter key, always tighten to the next available slot.

Frank DuVal

Brent Covey wrote:

>The problem you are experiencing is likely the nuts were not adequately
>tight in the first place and worked loose as you drove the car. Is there for
>example any chance when you assembled the front end that you torqued the
>nuts up properly, then backed off slightly to be able to fit the cotter keys
>in?
>
>
>  
>