<VV> Separation of Differential and PG

[Harry Yarnell]

They should just pull apart. Maybe there's something hanging up in the diff; 
pull the top plate off and have a look. Does the output shaft pull out the 
diff end?

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Ron" <ronh at owt.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, November 14, 2006 1:17 AM
Subject: <VV> Separation of Differential and PG


I've been having trouble separating a failed differential and a powerglide 
transmission.  They separated about a half an inch and refuse to go any 
farther.  The governor tab broke off so that isn't the culprit.  Is there 
anything else?  The two freely rock a little bit but don't separate.  The 
gear teeth are broken in the differential so it's junk but I would like to 
see if the PG is salvageable.

RonH
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________