<VV> Thermister on a 110 Head
Ron
ronh at owt.com
Fri Jan 20 18:13:59 EST 2006
Don't worry about any accuracy problems due to depth location as there won't
be any thermal gradients that you could ever measure.
RonH
----- Original Message -----
From: <mhicks130 at cox.net>
To: <virtualvairs at corvair.org>
Sent: Friday, January 20, 2006 3:08 PM
Subject: Re: <VV> Thermister on a 110 Head
> ------------------------------
> Is there a "boss" on a 110 Head that will allow you to install a stock
> thermister?
> ------------------------------
>
> There is a tapped hole on the driver's side head (that is used for the
> temp switch when it's on the passenger's side). Unfortunately, the thread
> pitch is wrong. The vendors come to our rescue with an adapter that the
> thermister threads into and then the two of them together get threaded
> into the hole in the head. Apperantly the hole isn't as deep as the one
> on the 140 and turbo heads so there is some question as to the accuracy of
> the indicated temperature when installed in a 110 head. Or so.
>
> mike
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
More information about the VirtualVairs
mailing list