<VV> lower shroud question

[Ron]

Replace???  I've never had to and can't imagine why anyone would have to as 
I've never run a Corvair without shrouds.  Maybe it's relatively cool here 
as it only gets up to 115 or so and we only heve a few weeks of a hundred or 
more, but I think it's foolish to remove them.  Just leave them on and 
you'll never have that trouble.
Isn't there a good picture of the damper door assembly in Lon's catalog and 
pictures and description in Section 6 of the '65 shop manual?
RonH

----- Original Message ----- 
From: "Arthur Landis" <MONZA63MO at peoplepc.com>
To: <virtualvairs at corvair.org>
Sent: Friday, October 14, 2005 4:17 PM
Subject: <VV> lower shroud question


> Does everyone replace their lower shrouds in the cooler weather?  Mine 
> were both missing the pivot pins and bushings on the exhaust duct dampers 
> so I bought new ones.  What I can't figure out is how the pivot pins stay 
> in place.  There's nothing to keep them secure.  Can someone please 
> explain to me how to properly put the lower shrouds back on and keep the 
> dampers in place?
>
> Thanks in advance
>
> Art in Missouri
> '66 Sport Sedan
> 140/PG
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>