<VV> Re: TRUNK PAINT

[Ruth Dorogi]

On the trunks that I do I coat the spatter paint with clear lacquer with a
flattening agent mixed in with the lacquer.  Dries to the proper sheen.  It
takes some experimenting to get the mixture right.  Dennis Dorogi
----- Original Message ----- 
From: <N2VZD at aol.com>
To: <virtualvairs at corvair.org>
Sent: Wednesday, May 25, 2005 10:09 PM
Subject: <VV> Re: TRUNK PAINT


> i used rustoleom grey paint on the trunks , waited a couple days , then
went
> over with the splatter paint. the time i tried clear over it , it did not
look
> real to me , way to shiney.  so if for show no clear, if i want to use the
> heck out of it i guess i would clear it with ureathane.
> just did my lakewood last fall(not used at all yet) it looks like factory
job
> with about a can and a half of splatter over grey rustoleum.
> regards, tim colson
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
>