<VV> Convertible top frame

[Norman C. Witte]

Joe, thanks, I'll try it your way.

As for alignment, I think I need to get the windows back in the car first!

Norm

> -----Original Message-----
> From: Joe West [mailto:joew at diveaz.com]
> Sent: Monday, May 09, 2005 4:42 PM
> To: Norman C. Witte; VV
> Subject: Re: <VV> Convertible top frame
>
>
> I installed the springs onto the frame and then installed the
> whole shooting
> match into the car.  Piece of cake.  Just remember to adjust
> things properly
> and CHECK by rolling up windows and checking the fit with the top up.
> Amazing how many adjustments there are, and the factory
> manual does a good
> job at explaining most of them.
>
> Joe
>
>
> On 5/9/05 1:12 PM, "Norman C. Witte" <ncwitte at wittelaw.com> wrote:
>
> > I am about to reinstall the top frame in my '65
> convertible.  It's a manual
> > top.  I was wondering if it's easier to install the springs
> first and then
> > install the top frame onto the springs, or to install the
> spring units on
> > the frame, and then stick the whole shooting match into the
> car.  My current
> > guess is that it's easier to install the spring assemblies
> separately, but I
> > am eager to hear the voice of experience.
> >
> > Thanks,
> >
> > Norm Witte
> >
> >  _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all
> copyrights are the
> > property
> > of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>

Joe West
Administrator
http://www.virtualcorvairclub.com