<VV> Convertible top frame

[Joe West]

I installed the springs onto the frame and then installed the whole shooting
match into the car.  Piece of cake.  Just remember to adjust things properly
and CHECK by rolling up windows and checking the fit with the top up.
Amazing how many adjustments there are, and the factory manual does a good
job at explaining most of them.

Joe


On 5/9/05 1:12 PM, "Norman C. Witte" <ncwitte at wittelaw.com> wrote:

> I am about to reinstall the top frame in my '65 convertible.  It's a manual
> top.  I was wondering if it's easier to install the springs first and then
> install the top frame onto the springs, or to install the spring units on
> the frame, and then stick the whole shooting match into the car.  My current
> guess is that it's easier to install the spring assemblies separately, but I
> am eager to hear the voice of experience.
> 
> Thanks,
> 
> Norm Witte
> 
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the
> property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
> 

Joe West
Administrator
http://www.virtualcorvairclub.com