<VV> Braided fuel lines
Kent Sullivan
kentsu at corvairkid.com
Fri Apr 1 12:06:54 EST 2005
My Webers are too... Picture at the bottom of this page:
http://www.corvairkid.com/190cid_02.htm
I really like the braided lines. Hard lines for this setup would be a lot of
work and using rubber fuel hose is a disaster waiting to happen!
--Kent
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of AKG
Sent: Friday, April 01, 2005 6:26 AM
To: virtualvairs at corvair.org
Subject: Re: <VV> Braided fuel lines
Never seen any with plastic. Depending on the type and manufacturer there
are different materials used for the liners. All that I am aware of will
melt/burn is subjected to open flame..
BTW - my Webers are plumbed with braided lines.
The Artful Dodger
> From: Paul Fox <paulvair at yahoo.com>
> Date: Fri, 1 Apr 2005 06:13:46 -0800 (PST)
> To: Sethracer at aol.com, AeroNed at aol.com, virtualvairs at corvair.org
> Subject: Re: <VV> Braided fuel lines
>
>
>
> One thing you might think about is the braided lines have plasic
> liners. I watched Stinger YS95 burn badly at IRP when the fuel lines
> melted. As I recall Jeff Moore said a blown head gasket may have been
> the cause of the fire to start with. It caught the fiberglass fan
> shroud on fire and just went up from there. Not a pretty sight.
>
> Paul Fox
>
>
> ---------------------------------
> Do you Yahoo!?
> Better first dates. More second dates. Yahoo! Personals
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights
> are the property of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org This list sponsored by the Corvair Society
> of America, http://www.corvair.org/ Post messages to:
> VirtualVairs at corvair.org Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list