<VV> The Latest on my FC Clutch Problem
Greenbrier Goon
greenbriergoon@yahoo.com
Mon, 11 Oct 2004 19:25:01 -0700 (PDT)
First, I would like to thank everyone who has offered suggestions on solving the clutch problem on my FC. Although the problem has not been solved, I have eliminated some possibilities.
I have checked the amount of pull that the cable is exerting on the rod at the differential. It is more than the minimum 7/8 inch required. I checked this after driving around for a few minutes and allowing the problem to arrise again as it does after about 3 minutes of driving.
Now I am positive that it is either the clutch itself or the pilot bushing. I think it is most likely the pilot bushing.
I will have to bite the bullet and pull out the drivetrain again to examine things. As I mentioned before, the NOS input shaft seemed to fit very snug in the new pilot bushing. That plus the fact that I did not soak the bushing in oil before installing it(I simply sprayed oil on it) might be why this problem exists.
Charles
Greenbrier World:
http://www.c-zone.net/northgte/greenbrier.htm
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!