BSCC- Machine shop in Boston Area (non-Corvair)

[lionelsgarage at aol.com]

SOAK IT IN PENATRATING OIL OVER NITE, THIS MITE WORK.





-----Original Message-----
From: Karl Haakonsen <cityhawk at pobox.com>
To: Bay State Corvairs <bsc-list at corvair.org>
Sent: Wed, Feb 2, 2011 5:20 pm
Subject: BSCC- Machine shop in Boston Area (non-Corvair)


Hi everyone,

I have a bit of a snowblower emergency.  The augers (parts 520 and 521 in the below diagram) are rusted fast to the shaft that goes through the gear case. I was wondering why I never broke any shear bolts the past couple of years... that's why. Needless to say, the gear in the gear case is stripped and I can't get the gear case apart to replace it until I get the augers off the shaft. Try though I might, I can't get them off and I was hoping a machine shop could do it for a reasonable cost, even if I have to replace the shaft (that part's not too expensive, but the augers are prohibitively expensive. Anybody here know who can accomplish this task at a reasonable price?

Thanks!
Karl



 _______________________________________________
his message was sent by the BSC-list mailing list, all copyrights are the 
roperty
f the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
his list sponsored by the Corvair Society of America, http://www.corvair.org/
ost messages to: BSC-list at corvair.org
ist info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
_______________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20110202/8e1d1a9f/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 55040 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/bsc-list/attachments/20110202/8e1d1a9f/attachment-0001.png