BSCC- Harmonic Balancer/Engine Mount

[Michele Bissonnette]

If the balancer slips on the rubber you'll get an incorrect timing light reading.  It may not fall apart but may slip.  Just a heads up.
Gary

--- On Sun, 3/7/10, jrg478 at aol.com <jrg478 at aol.com> wrote:


From: jrg478 at aol.com <jrg478 at aol.com>
Subject: BSCC- Harmonic Balancer/Engine Mount
To: bsc-list at corvair.org
Date: Sunday, March 7, 2010, 10:38 PM




I am begining to think about replacing the balancer and the engine mount on my '67 110. 
The rubber on the mount is dry, cracked and it is slightly dipped in the center. 
The rubber is cracked on the balancer. 
 
I have attached pictures of the items. 
 
Are there any other signs I should be looking for? 

Does it make sense to replace both of these items at the same time? 
 
Just looking for some input, as both items are expensive. 
 
Thank you in advance -
 
Jay Green

-----Inline Attachment Follows-----


_______________________________________________
This message was sent by the BSC-list mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: BSC-list at corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
_______________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20100308/b43f1862/attachment.html