BSCC- Sheet Metal Search

[adm1476 at aol.com]

Steve
?Any word on the body panel situation? I'm getting ready to junk this car soon. Let me know if your still goig to need any panels.
?Thanks Adam


-----Original Message-----
From: Stephen Silvia <ssdsliz at comcast.net>
To: Bay State Corvairs (MA) <bsc-list at corvair.org>
Sent: Mon, 15 Sep 2008 5:30 pm
Subject: Re: BSCC- Sheet Metal Search



Hi Adam-

I should know by the end of the week if I will need that piece.? The body shop is doing fabrication as I type.

Here is some information on the door hinges.

?

Thanks a lot!
Steve 

?

?

DOOR HINGES 

The '65 and '66 doors and hinges will interchange with corresponding body styles of these years, and the hinges are all the same. Doors and hinges for 1967 we unique and do not interchange with other years. The '68 and '69 are again unique to these years and won't fir previous years. Coupe doors can be made to fit convertibles and visa versa, however it means adding or removing some metal wedges, etc\. that were used on convertibles to keep the doors aligned. ? Source: The Classic Corvair by Bob Helt


----- Original Message ----- 

From: adm1476 at aol.com 

To: bsc-list at corvair.org 

Sent: Sunday, September 14, 2008 7:05 PM

Subject: Re: BSCC- Sheet Metal Search



Steve
?I'm in the process of parting out a 65 500. The body on the car is very solid it was sitting in a barn since 1973. Some surface rust, but no rot. It isn't a convertable but the rear panel and quarters should all be the same. The left rear quarter panel does have a dent in it, but no rot. You should come look at it and see what you think.
?Adam


-----Original Message-----
From: Stephen Silvia <ssdsliz at comcast.net>
To: Bay State Corvairs (MA) <bsc-list at corvair.org>
Sent: Sun, 14 Sep 2008 9:13 am
Subject: BSCC- Sheet Metal Search



Hi Everyone-

?

While you guys were off to Clark's I was on the Internet searching for body panels for my 66.??? It seems the body shop has really started to cut in the convertible deeper, and they are not too happy with what they see.?? Apparantly when my car was hit back in 1978 they body shop decided that wood was an acceptable method of repaing inner fenders.,,,,,,,,

?

I am in need of the lower rear section of the drivers side, or at the very least the drivers side rear panel (facing the back of the car) where the rear grille attaches.?? Mine is crushed very badly, Clarks' I beleive, has fiberglass but the body shop rolled their eyes at that.?

?

Thanks!!
Steve

508-676-2724

?

?

?



 _______________________________________________
This message was sent by the BSC-list mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: BSC-list at corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
 _______________________________________________


Looking for spoilers and reviews on the new TV season? Get AOL's ultimate guide to fall TV. 




_______________________________________________
This message was sent by the BSC-list mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: BSC-list at corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
?_______________________________________________



 _______________________________________________
This message was sent by the BSC-list mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: BSC-list at corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
 _______________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20080919/a4586ffc/attachment.html