BSCC- carb overhauls

[lionelsgarage at aol.com]

Jon, there will be a couple of clips left over, the holld some of the later modle choke rod's and accelerator pump. The plastic tube is for thevacuum port that is not used on the left (drivers side).
Lionel


-----Original Message-----
From: Jon Keeter <jonkeeter at yahoo.com>
To: bsc-list at corvair.org
Sent: Wed, 5 Nov 2008 4:31 pm
Subject: BSCC- carb overhauls




Thanks to a very good seminar from Lionel and Steve, I finished rebuilding the 4 carbs on the 140 using clark's 'super delux' kit for the primaries, and minor kit for the secondaries.? Thanks guys!? However, one problem, I have some leftover parts from the kits that I can't identify in the manual.? Can anyone help me?
1) Two clips, I think go on the float pin sides to hold it in place, if needed?
2) A small brass clip, about 1/4" diam, horseshoe shape with a little divot at the top, no idea what its for
3) A small white plastic piece, kind of like a pen cap in shape, but smaller. No idea what its for

The Chem-Dip sure made a big difference in their appearance, as did a few cans of Carb/Choke Cleaner from autozone!

Thanks,

Jon Keeter, Taunton, MA
'65 and '66 Corsa Conv






 _______________________________________________
This message was sent by the BSC-list mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: BSC-list at corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
 _______________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20081105/007ba7d5/attachment.html