<VV> LED Instrument lights

[Vairzwa]

Reposted, 1st attempt was rejected due to a suspicious header.
________________________________
From: Vairzwa <vairzwa at hotmail.com>
Sent: Wednesday, April 6, 2022 9:15 AM
To: virtualvairs at corvair.org <virtualvairs at corvair.org>
Subject: Re: VirtualVairs Digest, Vol 207, Issue 2

Daniel,
Check the wiring of the LEDs.  LEDs are polarity sensitive.  The D in LED stands for Diode.
You may have reversed the wires.  Don't always believe the wire colors.

Gary Mierzwa
WFCC
Chapter 325

________________________________
From: VirtualVairs <virtualvairs-bounces at corvair.org> on behalf of virtualvairs-request at corvair.org <virtualvairs-request at corvair.org>
Sent: Tuesday, April 5, 2022 11:00 AM
To: virtualvairs at corvair.org <virtualvairs at corvair.org>
Subject: VirtualVairs Digest, Vol 207, Issue 2

   1. Corsa Dash Not Lighting Up (Daniel Atkinson)
----------------------------------------------------------------------
Message: 1
Date: Mon, 4 Apr 2022 12:26:51 -0700
From: Daniel Atkinson <jazzworkerbee at gmail.com>
To: VirtualVairs at corvair.org
Subject: <VV> Corsa Dash Not Lighting Up
Message-ID:
        <CAH-rtPd55G1gvZQSDsBLL_7Sn+n4yX8C0hbnoF1OGtB0P7uVVA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

I recently upgraded my 65 Corsa gauge cluster to include a second CHT gauge
and LED lights. For reasons unknown, I cant get it to light up when I turn
the lights on. I know that it's well grounded because both temp gauges snap
to attention, the headlight indicator works as well as the turn signal and
GEN Fan lights. Am I missing something?

Thank you,
Daniel Atkinson