<VV> Escaped captive bolt

[hallgrenn at aol.com]

Carl,Use a photo of a captive seatbelt anchor nut that you CAN see as a guide to its size.  Then drill two small holes on either side of the bolt hole and screw in small screws to keep the anchor nut from turning.  Thoroughly clean and lube the threads of the seat belt bolt and anchor nut before you install the bolt.  If you want to really impress CORSA and if you have a set of small taps you could tap the two small holes and install set screws--then write and article for the Communique.  That's a great car you have.
Good luck