<VV> Carb numbering question
William Hubbell
whubbell at umich.edu
Mon Dec 28 10:42:14 EST 2020
Mike,
I hear what you are saying, and you are probably correct, but I’d like to add that, as useful as it is to research stock from collections in salvage yards, we have to be careful in drawing conclusions from that alone, especially if that research came from a single yard. Even the largest yards (such as the Corvair Ranch) may not be representing the full picture. For instance, since the Ranch is located in Pennsylvania, most of the cars there would be East Coast cars, likely produced at Willow Run, and therefore not particularly representative of cars produced at other plants.
Bill
On Dec 28, 2020, at 10:34 AM, Mike Stillwell via VirtualVairs <virtualvairs at corvair.org> wrote:
I have studied and owned some very early ‘66 Corvairs (#15 & #44) for over 30 years. There are always a lot of people that have a modified car who want to believe it was due to parts carried over from the past year. I have seen very very little evidence of this occurring. In the 2 early cars I owned, the 015 car 2 minor parts (thin sun visors and the “pin stripe” on the Corsa dash) and the 044 car had thin visors. Every other part on both cars was a 1966 year. I used to spend Saturdays at the Corvair Ranch examining each ‘66 in the field. I feel very confident saying your customer’s carbs have been swapped.
Mike
YS-117
Sent from my iPhone
> On Dec 28, 2020, at 9:42 AM, Grant Young via VirtualVairs <virtualvairs at corvair.org> wrote:
>
> I have a customer in Poland who has a 1966 Corsa 140. He thinks is it original. The carbs on the engine are the 1965/early 1966 style without the secondary lockout system, and have an ID tag of 7025226. The 4th digit in the code usually identified the year between 1963 and 1966 (1967 was tagged the same as 66 and 68/9 are 7028xxx), so I am checking to see if there is a numbers wizard on our site that knows if GM carried the carbs over to 1966 with the same tags until they switched to the later design secondary carbs with the 7026xxx designation? Pictures have been sent to confirm that the carbs are the early design with the solid activating rods. An inquiring mind would like to know.
> Thanks,
> Grant
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
> _______________________________________________
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________
More information about the VirtualVairs
mailing list